STEP 3:

       Release the hammer by squeezing the trigger and gently allowing it to pivot forward.  Push or tap out hammer pin and remove hammer, along with two hammer bushings and the bolt lock spring.
STEP 4:

     Replace the Ruger bolt lock spring with the supplied auto-bolt lock spring.  Place the new spring on the right hammer bushing with the red colored leg up.  Place the hammer with hammer bushings and new spring back into the trigger guard assembly and push in the hammer pin.  The hammer strut must mate inside of the rear slot of the hammer correctly.  Once the hammer pin is in place, cock the hammer to hold the hammer strut captive.

10/22 Parts
TF1 Action